MY165A Multi-Wheel Drive Mining Truck

Environmental Information

Machine Model

MY165A

Machine Name

Off-highway multi-wheel drive articulated mine trucks

Vehicle Classification

construction machinery

Environmental Information Label Location

Right side of frame longitudinal beam

Performance Parameters

Driving Form

8×6

Overall Mass (Kg)

47500

Rated Load Mass (Kg)

100000

Maximum Speed Unladen/Fully Loaded (Km/h)

46

Theoretical Maximum Climb (%)

36

Minimum Turning Diameter (m)

18.5

Approach Angle (°)

23

Departure Angle (°)

45

Dimensional Parameters

"Overall Machine Dimensions:
L×W×H (Mm)"

14500×4550×4450

Minimum Ground Clearance (Mm)

400

Motor

Model

WP17TG770E304

Displacement (L)

16.6

Rated Power/Speed (KW/r/Min)

566/1900

Maximum Net Torque/Speed (Nm/r/Min)

3300/(1200-1600)

Emission Standard

GB20891-2014  Non-road three stages

Transmission

Model

8DSS330

Structural Form

Single box with three intermediate shafts

Gear Ratio

8.46/6.41/4.64/3.33/2.37/1.55/1/0.71 Reverse gear 8.02

Clutch (In Car Gearbox)

Structural Form

Engine to Transmission Remote Connection, Two-Piece, Ceramic

Second Bridge
Third Bridges
Fourth Bridges

Type

drive axle

Rated Load (Kg)

40000

Form Of Braking

Cam Drum Brake

Front Axle

Type

Integral non-driven steering axle

Rated Load (Kg)

25000

Form Of Braking

Cam Drum Brake

Fig. Change One's Stance

Forms Of Assistance

Fully hydraulic steering

Driving Brake Form

Dual circuit compressed air drum brake

Parking Brake Type

Spring loaded drum brakes

Auxiliary Brake

turbo retarder

Suspensions

Front Axle Suspension

oil-air separation type oil-air suspension

Second Axle Suspension

oil-air separation type oil-air suspension

Three Bridges, Four Bridges

Steel plate spring + maintenance-free balance suspension + upper and lower split V-type thrust rod structure

Cabs

Type

Mining cab (right-hand drive)

Wagon

Length x Width x Height (Mm)

10000×3500×2500

Compartment Volume (m3)

Paperback 85; Stacked 100;

Wheel

Tire Model

16.00R25 E-3 ★★★ Block pattern

Rim Model

11.25-25 spoke plate 20mm

Unloading Systems

Forms Of Unloading

Cylinder flat push  

Accessibility

Standard with emergency steering, hydrodynamic retarder, 4-camera video system  

Advantages

"1. High safety: flat push unloading, unloading does not need to lift the cargo box, there is no unloading rollover phenomenon;
2. High passability: articulated structure connection, through a variety of complex road conditions, the tires are in full contact with the ground, the driving force is fully utilized;
3. High maneuverability: multi-wheel drive, rear double axle with steering, the turning radius of the whole vehicle is only 9.5 meters;
4. Large capacity: the cargo box is stacked with a large amount of square meters;
5. low failure, high attendance: flexible connection, effectively alleviate the big impact, multi-wheeled uniform tire life longer;"